How To Inject Hgh And Testosterone Safely And Easily

Protocol for Human Growth Hormone and Testosterone Injection

The primary method for Human Growth Hormone Administration is Subcutaneous Injection. Subcutaneous injection means the needle is inserted into the skin, and the shot is delivered just below the epidermal layer.

Testosterone HRT is delivered via a few methods, including Testosterone gels and patches, but it is also often delivered by injection. Testosterone Injections are delivered intramuscularly. This means that the needle used for a Testosterone Shot is delivered directly into muscle tissue, which later disseminates over time into the bloodstream.

This article informs you about the proper method to deliver both Human Growth Hormone and Testosterone Shots. You must read and follow these instructions with the utmost care for your own safety and the effectiveness of your prescription hormone regimen.

Getting Ready to Inject

• Wash your wrists and hands with great care using warm water and soap. Doing this will reduce the risk of needle contamination tremendously.

• After washing your hands, find a proper staging area for your injection. This area will be a flat, hard, disinfected surface such as your bathroom countertop. Although not absolutely necessary, the ideal location will also have a mirror.

• At this point, you should gather all of the supplies necessary to perform the injection. Carefully examine your supplies and ensure that no contamination has occurred and that all packages are properly sealed. If there are signs of tampering or products have been improperly stored, you must discard them.

In addition, make sure that the medications are not expired because the effectiveness and safety of Hormone Replacement Therapies decay over time, leading to inferior results or increased risk of complications and side effects as a result of the injection.

Important: When Administering Testosterone Intramuscularly, you will utilize two individual needles. The first needle is known as the drawing needle. It is used to obtain the proper dose from the Testosterone vial. The second needle is known as the administration needle. This needle will deliver the Bioidentical Testosterone Hormone into your muscle tissue.

How to Draw the Hormone Solution into Your Syringe:

• The first thing you must do is use alcohol swabs to sterilize the cap of the vial. The correct way to clean the cap is to slide the alcohol swab in a fluid motion across the vial cap in a single swipe.

• After sterilizing the cap of the Testosterone or HGH Hormone Vial, carefully open the package containing the needle and syringe. After you do this, pull back the plunger of the syringe until the air inside the syringe equals the dose of Hormone Replacement Therapy that you intend to deliver (for example, if your dose is three millimeters of the solution, you would retract the plunger until you reach the number 3 prominently displayed on the front of the syringe.

• At this point, push the needle directly through the rubber cap of the vial. The stopper must remain perfectly clean throughout this process. You must repeat the process before inserting the needle if you accidentally touch the rubber cap after initially sterilizing it with the alcohol swab.

• After inserting the needle, flip the Hormone Vial with its base facing upward. Make sure that the tip of the needle remains submerged in the solution until the needle is removed.

• Press down on the plunger, releasing the air captured within the syringe into the medication vial. This serves two purposes. First, this creates a consistency of air pressure inside and outside the glass vial, preventing the vial from cracking or breaking. Second, maintaining equal pressure within the vial will make a future withdrawal of medication less of a potential hassle.

• Make sure the needle tip is still properly submerged, then take both syringe and vial in one hand. With your free hand, pull on the plunger and take up the amount of solution that you intend to administer. Figure One is a visual aid intended to help you visualize how to accomplish this properly.

• Continue to maintain the vial in an inverted fashion and keep the drawing needle submerged in the fluid contained within the vial. Then tap softly upon the wall of the syringe, so any bubbles of air trapped in the vial rise to the top and dissipate.

• After doing this, you will press the plunger slightlyâaeonly enough to remove all the air trapped in the needle. This is vital because it is dangerous to inject air bubbles into the body as they can enter the bloodstream and lead to significant complications.

• After removing the air from the needle and retrieving your desired dose, carefully pull the needle out of the rubber stopper and the syringe.

• Seal the needle temporarily by carefully sticking the tip into a needle cap placed on the sterilized countertop. This will help prevent you from contaminating the needle or accidentally pricking yourself before you are ready to inject.

• For Intramuscular and/or Testosterone Injection only: Release the drawing needle from the syringe and safely dispose of it in a Sharps container approved by OSHA. There are strict Federal rules regarding the disposal of potentially biohazardous sharp objects and needles, and they must be placed in an appropriate biological, medical disposal container.

If you do not have a Sharps Container, you must acquire one before you can safely and legally use your Injectable Testosterone or Human Growth Hormone. It is of the utmost importance that you responsibly discard your used needles.

Protocol for Hormone Solution Injection:

Make sure that you keep all materials, needles, and syringes untarnished. It is imperative to prevent anything from contacting either the needle tip or the syringe.

Suppose the tip of the needle or syringe is touched in any way, or any other form of contamination occurs. In that case, you are recommended with utmost urgency to dispose of the needle and syringe and begin the process again with new and sterile tools to help prevent you from getting a dangerous infection.

• For Intramuscular and/or Testosterone administration, retrieve the administration needle from its sealed and untarnished package and carefully examine it for potential defects. Don't take the cap off the needle until fully prepared to inject.

• Twist the administration needle carefully but firmly onto the syringe. Keep the combo on your sterilized countertop until ready to administer the Testosterone Hormone Replacement Therapy.

• In the case of subcutaneous administration, a slim insulin syringe comes complete with the needle. This needle is sealed to the syringe and is impossible to remove. This needle will be used for injection.

• Take an alcohol swab and disinfect the skin patch you intend to use for administration. Allow the alcohol to dry only due to contact with the air. Discard the swab.

IMPORTANT: If you feel any knots, bumps, or lumps at the area you have chosen for injection, pick another site. Also, if you feel pain when applying pressure to a particular area, change your desired administration location.

Also, avoid any patch of skin which is unnaturally depressed, discolored, or scabbed. Keep away from broken wounds as well. If you have any questions about the viability of an injection site, contact us for more information.

• Take the cap off of the needle when you are prepared to inject. Take your fingertips and raise the area you intend to inject slightly by pinching the skin with your fingertips, making sure not to get your fingers on the spot you intend to inject. See Figure Two for a visual representation. The ideal administration locations are away from body structures such as bones, joints, and nerves. Contact us for a diagram of potential hormone injection sites. The ideal area to administer an Intramuscular Testosterone Injection is the muscle of the outer thigh or the buttocks (quadricep or gluteus Maximus). The ideal location to administer HGH or HCG Subcutaneously is in the soft skin surrounding the belly button.

• In a single firm but fast motion, inject the needle through the skin. You should inject at a forty-five-degree (diagonal) for Subcutaneous injection. For Intramuscular Injections, you should inject at a ninety-degree (perpendicular) angle.

The seventh step is only for Intramuscular Testosterone Injection. Skip to the eighth step for HGH Subcutaneous Injection

• Intramuscular: After you have injected the needle into the desired muscle location, retract the plunger just a bit and check and see if there is blood within the syringe. If there is, this means that you have struck a blood vessel or are very near one and must choose another location for injection.

• This only occurs rarely, but if it does, it is vitally important not to inject, as the Testosterone will potentially enter the bloodstream at an unintended rate.

If blood is contained within the syringe, pull the needle from the skin and throw away the needle in your approved container. After you have disposed of the needle, rub the injection site with clean tissue or gauze. Return to the second step and repeat the administration process after picking another site for injection.

• Administer the Hormone Therapy by pushing steadily and slowly onto the plunger until you have completely emptied the syringe. Press gauze or a cotton swab against the site of administration.

• Quickly but cautiously retract the needle from the skin, then massage the administration location with gauze or a dry cotton ball.

• Immediately throw away both the needle and the syringe into your OSHA-approved sharps disposal container.

• Return all equipment and medicine to a safe location that children cannot access. Make sure you store your Hormone Medications at their proper holding temperature inside the refrigerator. Also, make sure your other medical equipment is stored safely and intelligently.

• After your Sharps Container has been filled to recommended capacity, contact your local authority for waste management and follow their rules for appropriate bio-medical waste disposal.

At first, these steps may seem somewhat complicated, but after a few injections, the process will feel both simple and natural. Several treatment methods are available if you have issues with needles and are interested in Testosterone HRT.

Testosterone Injections are preferred by those who want faster results with a slightly increased chance of minor side effects. The results with Testosterone creams and patches begin to take place at a slower rate, but the chances for overdose are more negligible.

Testosterone pellets are also available for patients who are okay with injections but want to take as few as possible.

For now, the only way to receive Human Growth Hormone Replacement Therapy is via injection. Researchers are evaluating the potential of alternate methods, but to this date, injections are the only way to receive medically potent doses of HGH.

If you have questions about proper injection procedures, do not hesitate to contact us because your safety is our priority. The Conscious Evolution Institute is your best source for safe, affordable, and legal HGH and Testosterone Treatment.

Source: HGH Human Growth Hormone TV https://www.hgh.tv

Word Count: 1833